OpenServo.com

ginge · Posted: Thu Mar 29, 2007 5:45 pm Post subject:

Mike,

You can do it in plesk or the command line. Plesk would probably be more convenient.

Cliff,

Yeah, just noticed some of these too. A quick DB query shows over 117 affected posts and sigs. I think another DB query should fix this, but I want to run a lengthy backup first Wink

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

Barry,

I fixed up the documentation the Software page of the Wiki at:

http://www.openservo.com/moin.cgi/Software
http://www.openservo.com/moin.cgi/WinCVSNotes

to use the case you indicated earlier. Let me know if anything doesn't look right.

-Mike

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

The timezone for the server has been set to GMT. It now reports:

# date
Thu Mar 29 18:04:36 GMT 2007

at the time of this posting.

Does GMT sound like the best timezone for everyone given that we have people from all over the world?

-Mike

ginge · Posted: Thu Mar 29, 2007 6:33 pm Post subject:

Mike, GMT sounds good. Anything else could get confusing.

ginge · Posted: Thu Mar 29, 2007 6:47 pm Post subject:

ginge · Posted: Sat Mar 31, 2007 2:35 pm Post subject:

As you may have already noticed, we have changed the email address of the topic reply notification to no-reply@openservo.com from the @sneakemail address.

Please update any email rules you have in place to deal with this change.

Thanks.

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

Cliff · Joined: 23 Jan 2007 Posts: 150 Location: Saratoga, CA

Barry,

I don't know if you have noticed, but it seem that Latex is not playing nice here.

Cliff

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

Thanks Cliff. I think that Barry and I had forgotten that Latex was installed on the old site and that page didn't survive the translation. I'll need to look into this.

-Mike

ginge · Posted: Tue May 08, 2007 5:05 pm Post subject:

Hi Mike/Cliff/All

I am having a little trouble with LaTeX. It is installed, and so are the support packages. The LaTeX docs are a little sketchy, and I am way out of my depth on this one. Any ideas people?

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

I would be out of my depth with Latex as well. This was installed as a request from Stefan and somehow Andy got it working within the Windows NT environment on the old site. I'll look through my old emails to see if they exchanged instructions on the installation.

-Mike

ginge · Posted: Tue May 08, 2007 5:22 pm Post subject:

Mike,

These seem to be the instructions for the MoinMoin installation.

http://wiki.vislab.usyd.edu.au/moin.cgi/moinmoin-LaTeX

It looks like we have to jump through some hoops because the dvipng package is not in the repository. Time to find a RPM

I will see what I can do to get this working, but I stand by my point of not having a clue Wink

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

ginge · Posted: Tue May 08, 2007 5:44 pm Post subject:

I think I have it cracked.

That wasn't so painful afterall.

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

Terrific. Thanks. I wasn't finding anything in my past email that would have helped.

-Mike

Cliff · Joined: 23 Jan 2007 Posts: 150 Location: Saratoga, CA

This is a test.

There has not been a post in the last 4 days - I'm just trying to figure out whether the forum is broke Sad

or if everybody died. Shocked

Cliff

ginge · Posted: Mon May 21, 2007 12:53 pm Post subject:

The latter methinks. I also did a test post for my own sanity.
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/