OpenServo.com

HakBot · Joined: 31 Jul 2006 Posts: 14

Hello,

I recently built a web interface for one of my servo controllers. It is open source so do what you wish with it. It is set to work on port 81 by default and the project was created using C++ .NET 2005.

Source: www.endurance-rc.com/software.html#webinterface

ginge · Posted: Thu Oct 04, 2007 6:43 pm Post subject:

Hi HakBot,

Good to see you are still lurking.

Great work on the web interface code. Hopefully there is someone here that can take it and make it OpenServo compatible.

Thanks again,

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/

HakBot · Joined: 31 Jul 2006 Posts: 14

Im always lurking somewhere Very Happy

The open servo can be driven via PWM correct? If so it would be compatible with my driver out of the box.

ginge · Posted: Fri Oct 05, 2007 4:43 pm Post subject:

Hi HakBot,

Yes, The OpenServo has PWM capability. Again, nice.

Barry
_________________
http://www.headfuzz.co.uk/
http://www.robotfuzz.co.uk/